Summer Starts Here - Save up to 70%
Westin HDX Nerf Bars Installation - 2012 Chevrolet Silverado- Video
What's up everybody, Adam here with etrailer. Today we have my dad's 2012 Chevy Silverado, 2,500 HD. And we're gonna be taking a look at the Westin HDX running boards. The HDX running boards are gonna be made of a steel construction. They have a nice powder coated finish, which is a flat black, which I really like. It's like a matte type. more
12/15/2021 2:55:16 PM
Westin Grate Step Nerf Bars Kit Installation - 2012 Chevrolet Silverado- Video
What's up, everybody Adam here with etrailer. Today, I have my dad's truck and we're getting some upgrades. What upgrades Well, we took the old running boards off. And now, we have the Westin Grate Step running boards on here, and they look great. If I we're to compare these to any of the other ones that we have on our website, there's two of them that are kinda in the same ballpark. One's gonna be the Aries RidgeStep. more
11/30/2021 1:37:02 PM
Pilot Bully Black Bull Side Steps Installation - 2011 Chevrolet Silverado- Video
Speaker 1: Today on our 2011 Chevrolet Silverado, we're going to be installing Pilot's Bully Black Bull Side Steps, part number BBS-1103. These side steps are going to make it easier to get in and out of your vehicle. It's got a nonslip, rugged textured surface to help you get in and out with no problems and it had a maximum capacity of 350 pounds, so it's nice and study. It's constructed with aluminum with a black powered hook finish. Both the driver side and passenger side steps are included as well as all the mounting hardware that you will need.We're here on our driver's side at the lower kick panel with the door open. We want to align the front of our step with the front of our seat and when you go to line up your step, you'll notice there's a pillar blocking you from being perfectly in line with your seat bracket there. more
10/5/2018 8:22:11 AM
Aries Oval Nerf Bars Installation - 2008 Chevrolet Silverado- Video
Speaker 1: Today on our 2008 Chevrolet Silverado we're going to be taking a look at and showing you how to install the Aries Oval Nerf Bars in stainless steel, part number AA364013-2. Now, they're also available in black using part number AA364013.Here's what our bars look like once we have them installed. Now, these are going to be great helping us get in or out of our truck. Now, these nerf bars are wheel to wheel, which is nice because they're going to give us that third step at the back, which is making it that much easier to get in our truck bed. They're 4 inch wide oval bars, which means they're going to have more stability over the round bars, because it's going to have a greater surface. The extra wide step is going to be great for us getting in or out, making sure we have a nice secure footing. more
9/26/2017 9:52:23 AM
Westin Tube Step Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado 1500, we'll be installing the Westin E-Series Round Nerf Bars that are three inch in diameter, with a polished stainless steel construction, part number 23-1400. It gives you a nice, good, solid entry step to get into your vehicle. It makes it easier to get into the vehicle. This nice, black step pad here gives us a nice, non-slip finish. Even if we have mud on our boots, or it's raining outside, once we step on here we're not going to slip off. It gives us a nice, secure, easy, and safe way to enter our vehicle. There is no drilling required, and it is a quick and easy bolt on installation. Now here's what we have on our driver's side. more
8/7/2016 8:56:30 AM
Westin E-Series Round Nerf Bars Installation - 2010 Chevrolet Silverado- Video
Today on our 2010 Chevrolet Silverado 3500, we'll be taking a look at and showing you how to install the Westin E-Series 3" Round Nerf Bars in black, part number 23-1955. Here's what they look like once they're installed. They're nice 3" tube, so we get that nice appearance, with the rounded edge on both ends. It gives you the finished look as well. With the powder-coated finish and our non-skin steps here, it's going to make it really easy to get in your vehicle. With these step pads here, it's not a cutout design like some of the ones on the market, so we can ensure we're not going to get water inside our tube. It's just kind of pushed down, the same piece of metal, and the step pad is affixed to there. more
8/6/2016 8:41:06 AM
DeeZee Round Nerf Bars Installation - 2005 Chevrolet Silverado- Video
Today on our 2005 Chevrolet Silverado, we're going to show you Dee Zee Nerf Bars, part number DZ371523. We've got them installed on our passenger side of our truck, so let's go ahead and cover some of the features. First off, this is a polished stainless steel finish. The diameter of the tube is going to be about three inches. You can see it has a 90 degree turn, and this is inaudible 00:00:23 bent, which means that the tube has a smooth bend all the way around. No kinks or anything like that. The step plates here are constructed from the heavy duty plastic, one half for our extended cab here and of course, the other one for the front of our cab. more
4/10/2015 1:37:51 PM
Bestop PowerBoard Motorized Running Boards Installation - 2013 Chevrolet Silverado- Video
Today on this 2013 Chevy Silverado, we'll be installing the Bestop PowerBoard, part number B7512615. With out powerboards installed, we'll go through the basic operation of our powerboards. With the doors closed, you'll notice that the powerboards are up and our courtesy lights are off. When we open up what is the driver's, passenger's front or rear doors the power board on that side will extend turning on the courtesy light. Then when we close the door, the powerboard will pull back up and tuck back underneath the vehicle. With the power board, it provides a sleek and stylish way to increase the safety and ease of getting in and out of the vehicle. Here's what our powerboard will look like once installed. more
1/19/2015 1:04:13 PM
DeeZee FX Extruded Running Boards Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado 2500 HD Extended Cab were going to be installing the Dee Zee FX extruded running boards with a black powder coat finish part number DZFX 11352. Weve gone ahead and set the running boards out. Our first step were going to need to install this gasket here on the top lip of the running board. Well go ahead and lineup the end of the gasket with the end of the running board and then well work the gasket under the running board to the other end where we may need to do some trimming.Now that we have our gasket down here on the other end of our running board, youll see that its a little bit longer than the running board. Were going to use a pair of tin snips to cut it the length as we want the gasket to line up with the end of the running board. Ill go ahead and put a quick mark for where we need to cut and we can pull the gasket back up a little bit. more
8/15/2014 9:59:35 AM
Pilot Tube Step Installation - 2010 Chevrolet Silverado- Video
Today on this 2010 Chevy Silverado, were gonna install part number NB-1109x from Pilot.Our attachment points are on the body bolts on this vehicle and there are three of them as theyre shown here.Next step is well go ahead and layout our parts. We have a short bracket that goes on the front and then the long bracket that stays in the center and then a tall bracket that goes in the back.So well go ahead and loosen up the body bolts. You want to do this by hand first because some of the models have a thread locker on there and an air ratchet could break the nut inside the body. When we take the bolts out, you wanna prepare the stock bolts to the bolts that come with the kit. Some models have a thicker bolt. If thats the case, go ahead and use the factory bolts. more
11/30/2011 4:32:45 AM
Westin Tube Step Installation - 2010 Chevrolet Silverado 2500- Video
Today on this 2010 Chevrolet Silverado 2500 Series HD regular cab we are going to be installing Westin nerf bar part number 23-1400. We are looking at the driver side of the vehicle and the first thing we want to do is locate the body mount, the front and rear. The front body mount is located just rear of the front tire. If you follow rearward just about even with the edge of the door just below it is our rear body mount and that is what we are going to be attaching our nerf bar set up to. With those located we are going to start with the front body mount and what we want to do is remove the existing bolt. You can see that it is likely that the rubber bushing is going to come down as well and that is fine. We want to take that and set it off to the side for the time being and remove the rear body mount bolt. 00:55 more
9/15/2010 4:47:06 AM
Westin Tube Step Installation - 2006 Chevrolet 2500 HD Series- Video
Today at Etrailer.com we are going to be working on this 2006 Chevrolet 2500 HD Series. We are going to be installing part number 23-1950 from Westin. The first thing we are going to do is we are going to want to remove the forward, center, and rear most body mount bolts. That is where our tube steps are actually going to mount. The first thing we are going to do is remove the bolts. Now that we have got our bolts removed I am going to show you on the brackets themselves that they are actually marked per side and which location they go in. This one says PF so it is going to be Passenger Front. Then the center bracket is going to be the longer one. In the center of it, it is going to say PC for Passenger Center. Then on the rear bracket which is the medium size one is going to be marked with the letters PR for Passenger Rear. For the driver side it is going to have Driver Front, Driver Center, and Driver Rear marked on them. 01:01 more
5/22/2010 9:05:32 AM
Filter Videos
Filter Videos
